| GULF COAST PAINT MFG., INC. |
|
PC-149 Deep Penetrating Epoxy Concrete Primer/Sealer A clear two component, polyamide epoxy primer/sealer, PC-149 is a one or two coat system designed to seal and protect concrete from water and chemical penetration. PC-149 is also used as a primer coat under our high performance, thin film coating systems. |
|
PC-1702 VOC Compliant 100% Solids Epoxy Concrete Primer
A solvent free, low viscosity, deep penetrating primer/sealer used as a primer under epoxy grouts and overlayments, linings and high performance thin film coating systems or as a clear amber sealer over concrete. A low temperature cure resin with outstanding chemical resistance. |
|
PC-240 VOC Compliant Water Based Epoxy Coating
PC-240 is a two component, low odor, non-toxic water based epoxy coating. PC-240 has a tile-like high gloss finish with excellent durability. Ideal for walls, ceilings, and equipment. Available in a wide range of colors. VOC compliant. |
|
CM-15 High Build VOC Compliant Epoxy Mastic Coating
A two component, high solids, high gloss amine adduct cured epoxy coating. A tile-like finish with excellent abrasion and chemical resistance. A protective coating for concrete and steel. Available in a number of color. Can be brushed, rolled or sprayed. VOC compliant. PC-500 Ceramic Filled VOC Compliant Epoxy Coating A two component, high solids, high build ceramic filled coating based on cyclo-aliphatic/phenolic resin which provides excellent chemical resistance to acids, caustics and solvents. For concrete and steel. Being ceramic filled, abrasion and impact resistance is outstanding. VOC Compliant. PC-517 Glass Filled Epoxy Mastic Coating A two component, high solids, high build, one coat epoxy mastic. PC-517 has a high gloss tile-like finish and is 92% solids by volume. It is glass filled for high abrasion and impact resistance. For concrete and steel. PC-555 Chemliner Novolac VOC Compliant Epoxy Coating PC-555 is a two component, high solids, Novolac Epoxy Coating. Using the Novolac resin enables the highest performance for chemical resistance. Resistant to concentrated sulfuric acid and HCL. Ceramic filled for maximum abrasion and impact resistance. Recommended for concrete and steel. PC-590 Wet Surface VOC Compliant Epoxy Coating A two component, solvent free epoxy coating designed for painting wet, camp or humid areas. Formulated with a moisture insensitive polymer which will cure under water. Can be sprayed, brushed or rolled. PC-636 Low Temperature Fast Curing Epoxy Mastic A two component high build Amine Epoxy that will cure down to 25°F. PC-636 is a surface tolerant Epoxy with excellent adhesion to hand tool power tool cleaned surfaces. This fast setting epoxy can be, depending on temperature, recoated the same day. PC-636 has excellent chemical, abrasion and impact resistance. Available on most industrial colors. PC-1850 Solvent Free VOC Compliant Epoxy Glaxe Color Coating A two component, tile-like, high gloss finish for concrete. PC-1850 is a self-leveling coating that is applied at 10-60 mils dry. A 100% solids coating, free of solvent and low odor. Excellent system over vacuum shot blasted floors, or applied over PC-1700 Epoxy Concrete. |
|
MCU-100 VOC Compliant Moisture Cured Urethane Aluminum Coating
A unique one component aluminum primer/finish coat. Designed as a primer for marginally prepared surfaces. Fast recoat; 2 hours at 75°F. Low temperature cure down to 18°F. CT-370 VOC Compliant High Build Polyurethane Enamel A two component, high solids, high guild polyurethane enamel. CT-370 has a high gloss, tile-like finish. Being an aliphatic polyurethane, it has excellent resistance to chalking and fading. The best product for color retention. |
|
PC-1000 VOC Compliant Epoxy Amine Grout Resin
A 100% solids, two component modified amine epoxy resin. A low viscosity resin used with silica sand for patching and troweling on concrete. An economical system for patching in aisle-ways, warehouses and production areas. Available in prepackaged kits. PC-1100 VOC Compliant Chemical Resistant Epoxy Resin A two component, 100% solids epoxy resin used for toppings, overlayments and patching. PC-1100 has excellent chemical, abrasion and impact resistance. PC-1100 has a compressive strength of approximately 11,500 psi. Fast cure time and also available in prepackaged kits. PC-1175 VOC Compliant Chemical/Abrasion Resistant Epoxy Resins A low viscosity, two component, 100% solids resin. When combined with selected aggregate, PC-1175 can be hand troweled, power troweled, screeded or squeegeed in a self-leveling slurry form. Outstanding abrasion and impact resistance. Recommended for loading docks, aisle-ways, production areas, etc. |
|
CF-621 VOC Compliant Semi-Flexible Joint Sealer
A two component, 100% solids flexible joint sealer, CF-621 is designed for expansion and contraction joints. CF-621 is a resilient product which has 150% elongation. It is formulated from moisture insensitive polymers which will cure in the presence of moisture. CF-621 is a pourable, self-leveling product which is easy to apply. |
Gulf Coast Paint Mfg., Inc.
Phone (251) 964-7911